AMERICAN ONSITE
American Manufacturing Company, Inc.
DESIGN SHEET: Drip Disposal
DRIP DESIGN WORKSHEET:

PROPERTY ADDRESS:_____________________________________________
TAX MAP #._________________PHONE:____________ DESIGNER'S NAME:__________________________

  1. _____ GALLONS PER DAY_________BEDROOMS          Date:_____________
  2. _____ GPD/L.F. SOIL LOADING RATE
  3. _____ FT. X _____ FT. AREA FOR DISPOSAL LAYOUT a)_____ FT2
  4. _____ GPD/FT2 SOIL LOADING RATE PROVIDED ( #1 / # 3a )
  5. _____ ZONES
  6. _____ TOTAL DRIPPER LINE PROVIDED
  7. _____ SEPTIC TANK SIZE
  8. _____ DOSING TANK SIZE
  9. _____ GALLONS PER INCH DOSING TANK
  10. ZONE ONE
  11. _____ TOTAL ABSORPTION AREA
  12. _____ LINEAR FEET DRIPPER LINE
  13. _____ LONGEST LATERAL LENGTH
  14. _____ DOSING FLOW RATE
  15. _____ NUMBER OF RETURN FIELD FLUSH CONNECTIONS
  16. _____ FIELD FLUSH FLOW RATE
  17. _____ TOTAL FLOW REQUIRED
  18. ZONE TWO
  19. _____ TOTAL ABSORPTION AREA
  20. _____ LINEAR FEET DRIPPER LINE
  21. _____ LONGEST LATERAL LENGTH
  22. _____ DOSING FLOW RATE
  23. _____ NUMBER OF RETURN FIELD FLUSH CONNECTIONS
  24. _____ FIELD FLUSH FLOW RATE
  25. _____ TOTAL FLOW REQUIRED
  26. ZONE THREE
  27. _____ TOTAL ABSORPTION AREA
  28. _____ LINEAR FEET DRIPPER LINE
  29. _____ LONGEST LATERAL LENGTH
  30. _____ DOSING FLOW RATE
  31. _____ NUMBER OF RETURN FIELD FLUSH CONNECTIONS
  32. _____ FIELD FLUSH FLOW RATE
  33. _____ TOTAL FLOW REQUIRED
  34. ZONE FOUR
  35. _____ TOTAL ABSORPTION AREA
  36. _____ LINEAR FEET DRIPPER LINE
  37. _____ LONGEST LATERAL LENGTH
  38. _____ DOSING FLOW RATE
  39. _____ NUMBER OF RETURN FIELD FLUSH CONNECTIONS
  40. _____ FIELD FLUSH FLOW RATE
  41. _____ TOTAL FLOW REQUIRED
  42. _____ MAXIMUM DESIGN FLUSHING FLOW
  43. _____ FEET HEAD LOSS HYDRAULIC UNIT (BASED ON # 42)
  44. HYDRAULIC UNIT SUPPLY LINE SIZE (1-1/2" TYPICAL)
  45. _____ INCHES PIPE
  46. _____ LENGTH SUPPLY PIPE
  47. _____ FT. STATIC LIFT (CENTRAL UNIT ELEVATION - OFF FLOAT ELEVATION)
  48. _____ TOTAL FEET HEAD LOSS LINE (DYNAMIC HEAD LOSS + #47)
  49. FORCE MAIN SUPPLY LINE PIPE SIZE & LENGTH
  50. _____ ZONE ONE SIZE, _____ ZONE ONE LENGTH _____ FEET HEAD LOSS
  51. _____ ZONE TWO SIZE, _____ ZONE TWO LENGTH _____ FEET HEAD LOSS
  52. _____ ZONE THREE SIZE, _____ ZONE THREE LENGTH _____ FEET HEAD LOSS
  53. _____ ZONE FOUR SIZE, _____ ZONE FOUR LENGTH _____ FEET HEAD LOSS
  54. RETURN FLUSH LINE SIZE & LENGTH
  55. _____ ZONE ONE SIZE, _____ ZONE ONE LENGTH _____ FEET HEAD LOSS
  56. _____ ZONE TWO SIZE, _____ ZONE TWO LENGTH _____ FEET HEAD LOSS
  57. _____ ZONE THREE SIZE, _____ ZONE THREE LENGTH _____ FEET HEAD LOSS
  58. _____ ZONE FOUR SIZE, _____ ZONE FOUR LENGTH _____ FEET HEAD LOSS
  59. _____ FEET HEAD LOSS TOTAL STATIC (VERTICAL LIFT)
  60. TOTAL PRESSURE LOSS ( ADD ITEMS; 43,48,50-53,55-58,59,+FLUSHING)
  61. _____ ZONE ONE HEAD LOSS, INCLUDES _____ FEET FLUSHING
  62. _____ ZONE TWO HEAD LOSS, INCLUDES _____ FEET FLUSHING
  63. _____ ZONE THREE HEAD LOSS, INCLUDES _____ FEET FLUSHING
  64. _____ ZONE FOUR HEAD LOSS, INCLUDES _____ FEET FLUSHING
  65. PUMP SIZING
  66. _____ MAXIMUM PRESSURE LOSS TOTAL (HIGHEST FEET 61-64)
  67. _____ DISC FILTER BACKFLUSH (#48 + 115' @15 GPM)
  68. _____ GPM @ _____ FEET (LARGER OF 66 & 67)
  69. PUMP MODEL___________________
  70. _____GPM @ _____FEET _____VOLTS _____PHASE _____HP
  71. TIME DOSING PER ZONE
    • Two Zone Standard Enable           (180 min rest)
    • Two Zone Peak Enable           (108 min rest)
    • Four Zone Standard Enable           (90 min rest)
    • Four Zone Peak Enable           (54 min rest)
  72. ZONE ONE____ GPM ____MIN/DOSE ____AVE. CYCLES ____PEAK CYCLES____GAL/DOSE
  73. ZONE TWO____ GPM ____MIN/DOSE ____AVE. CYCLES ____PEAK CYCLES____GAL/DOSE
  74. ZONE THREE ____ GPM ____MIN/DOSE ____AVE. CYCLES ____PEAK CYCLES____GAL/DOSE
  75. ZONE FOUR ____ GPM ____MIN/DOSE ____AVE. CYCLES ____PEAK CYCLES____GAL/DOSE
  76. _____ INCHES DRAWDOWN FLOAT SWITCH SETTING (MINIMUM 4")
AMERICAN MANUFACTURING COMPANY, INC.
Last revised: July-7-2006
Comments to: info@americanonsite.com
Copyright © American Manufacturing Company, Inc., 2000
HOME | ABOUT | ORDER INFO | PRODUCTS | DRIP SYSTEMS | CONTROLS | CONTACT | DATA CENTER | SITE MAP