Products
Systems
Controls
LIFT & DISTANCE TABLE INSTRUCTIONS
PRESSURE COMPENSATING (15 GPM)

  1. The vertical lift is the elevation difference between the "off float" and the highest point in any zone.
  2. The diameter of the pipe from the pump tank to the hydraulic unit is 1-1/2" minimum.
  3. All supply and return pipes are 1".
  4. The flush return pipe from the hydraulic unit to the pretreatment tank is 1-1/2" gravity.
  5. The maximum distance from the pump tank to the hydraulic unit is 30'.
  6. The tables may be used with the standard zone detail configuration only. A calculation sheet must be filled out for any other configuration.
  7. Top feed manifolds must be used when any discernible slope is encountered.
Maximum Static Lift ("Off Level Float" to Drip Field)
        
 Supply/      
1Return Line2-Lat3-Lat4-Lat5-Lat6-Lat7-Lat
 (feet)300'300'300'240'165'100'
2       
3100988875747977
4150968469667068
5200948163586159
6250927757515249
7300907350434440
8350887044353531
9400866638272621
104508463321917 
1150082592612  
12550805520   
13600785214   
1465076488   
1570074452   
167507241    
178007037    
188506834    
199006630    
209506427    
2110006223    

AMERICAN MANUFACTURING COMPANY, INC.
Last revised: Jan-9-2006
Comments to: info@americanonsite.com
Copyright © American Manufacturing Company, Inc., 2000

HOME | ABOUT | ORDER INFO | PRODUCTS | DRIP SYSTEMS | CONTROLS | CONTACT | SITE MAP